이제품도 지원되는거 맞나요?

PS게시판

이제품도 지원되는거 맞나요?

주둥이황구

2010-09-04 오후 1:07:51 Hit. 4193

찾다보니까 해킹정보에 글에나온 거랑 비슷하게 생겼는데 이름도 비슷하구요
 
 
INFO:
AT90USB162 is the easiest way to add USB functionality to your next device Atmel provide free open source HID (mouse keyboard) and CDC (USB-to-RS232) code and on top of this AT90USB162 cost is same as ATMega16 so what you are waitng for? AVR-USB-162 board provide the basic circuit necessary to work with AT90USB162 - USB connector and circuit external power supply if your circuit require more power than 100mA which usually USB port provide button status LED reset button. All AT90USB162 come from Atmel pre-programmed with bootloader which allow code to be programmed inside the chip without any external programmer just download the FLIP software from Atmel web site and load your HEX code inside AT90USB162. To enter the bootloader mode you shoud press and hold BUT button then press and release RST button. If you preffer to use ICSP programmer note that only AVR-ISP-MK2 is supporting AT90USB162 as there are pretty new devices probably AVR Dude will add support later but for the moment you can't use AVR-PG1 or AVR-PG2 for ICSP programming another bad news is that AT90USB162 supports only debug Wire not JTAG so to debug it you should have the expensive AT-JTAGICE-MK2.
FEATURES:
<UL type=disk>
<LI>AT90USB162 microcontroller with 16KB Flash 512B RAM 512B EEPROM 
<LI>ICSP 5x2 pin connector for in-circuit programming with AVR-ISP-MK2 (you generally don't need to use ICSP as you can program via USB) 
<LI>Debug Wire could be performed by 3 wires connected to ICSP (AT-JTAGICE-MK2 have such lose wire connector which to be used you need VCC GND RST signals only) 
<LI>USB 2.0 Full speed connector 
<LI>user button BUT (can be used to enter bootloader mode after reset) 
<LI>reset button RST 
<LI>takes power from USB no need for external adapter 
<LI>external power supply and voltage regulator if USB can't provide enough power 
<LI>Quartz crystall oscilator circuit 8Mhz 
<LI>extension pin headers for each uC pin 
<LI>four mounting holes 3.3 mm (0.13") 
<LI>Grid 100 mils 
<LI>GND bus 
<LI>Vcc bus 
<LI>FR-4 1.5 mm (0062") green soldermask white silkscreen component print 
<LI>dimensions 100x80 mm (3.9x3.15") </LI></UL>
DOCUMENTS:
<UL type=disk>
<LI><A href="http://www.olimex.com/dev/pdf/AVR/AVR-USB-162.pdf" target=_blank>AVR-USB-162.pdf</A> users manual </LI></UL>
HARDWARE: 
<UL type=disk>
<LI><A href="http://www.olimex.com/dev/images/AVR/AVR-USB-162-sch.gif" target=_blank>AVR-USB-162 schematic</A> 
<LI><A href="http://www.olimex.com/dev/images/avr-icsp-10.gif" target=_blank>AVR ICSP connector</A> (top view) </LI></UL>
SOFTWARE: 
<UL type=disk>
<LI><A href="http://www.atmel.com/" target=_blank>Atmal USB FLIP programming software</A> for programming 
<LI>AVR-USB-162 blink LED demo code (<A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb-162_Led.zip" target=_blank>C source</A> and <A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb-162_Led.hex" target=_blank>HEX</A>) 
<LI>AVR-USB-162 button demo code (<A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb-162_Button.zip" target=_blank>C source</A> and <A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb-162_Button.hex" target=_blank>HEX</A>) 
<LI>AVR-USB-162 frequency generator (<A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb_Frequency.zip" target=_blank>C code</A> and <A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/avr-usb_Frequency.hex" target=_blank>HEX</A>) 
<LI>AVR-USB-162 mouse demo code <A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/AVR-USB-162-MOUSE.zip" target=_blank>C source</A> 
<LI>AVR-USB-162 virtual COM port demo code <A href="http://www.olimex.com/dev/soft/avr/AVR-USB-162/AVR-USB-162-CDC.zip" target=_blank>C source</A> 
<LI><A href="http://www.fourwalledcubicle.com/MyUSB.php" target=_blank>MyUSB</A> LGPL USB stack from Dean Camera </LI></UL>

Lv.3 / 이등병 . 주둥이황구 (ghksljin)

( 254 / 400 ) 64%

포 인 트 : 354 P
가 입 일 : 2009-07-09 오후 12:39:26
최종접속일 : 2015-12-01 오전 2:33:53

0		0

불량게시글신고

글쓰기 수정 삭제 목록

에크스


정보 PSP 용 PSGroove 거의 완성 단계인가 보네요. 18	허술아비	2010.09.04	4659
PS3 탈옥 usb만으로는 안되는것 같은데요.. 11	interlion	2010.09.04	3944
PS2 AVR-USB 162 칩셋 구동 동영상 22	dldbswjd	2010.09.04	7202
질문 ATMEL사제품 AT90USBKey라고하는데요 이거 맞나요 11	리리플레이야	2010.09.04	4550
질문 플삼 하드로더 6	3리이장	2010.09.04	3353
질문 하나만 더 여쭤볼께요^^.... 9	주둥이황구	2010.09.04	2515
질문 이제품도 지원되는거 맞나요? 7	주둥이황구	2010.09.04	4194
잡담 우리가 흔히 Jailbreak 라고 하면 말입니다. 12	가가각	2010.09.04	2755
잡담 회색천사님 저도 usbkey 관심있는데요 7	주둥이황구	2010.09.04	2635
질문 지금 모드칩이 여러종류인것 같은데, 어떤걸 사실껀가요? 14	김구찌	2010.09.04	3553
질문 홈브류 강좌 문의 5	황이다	2010.09.04	1777
잡담 psp용 공개되고있는건가요 13	엘리쉬	2010.09.04	3302
PS3 모드칩 샀는데요 28	matsu	2010.09.04	5543
정보 노키아n900으로 탈옥 제작 실행 19	기모중	2010.09.03	5277
PS3 지금 자작 ps3탈옥칩 만들수 있는 메인칩셋이 15	똘추오덕	2010.09.03	5511
PS3 PS3 탈옥 호주에서 불법 판결 16	박정민	2010.09.03	3360
잡담 로더하면 플삼렌즈크리 걱정은 많이 줄어들듯하군요 10	검사2	2010.09.03	3034
PS3 이제 PS3 한대 구매 해야 할듯 ~~ 10	예슬이아빠	2010.09.03	2742
질문 킷주문취소 멜 영어로 보냈는데 맞나 봐주세요 5	똘추오덕	2010.09.03	2019
잡담 delete 6	smnery	2010.09.03	3398